April 16, 2021

JEGS Floatless Fuel Sending Unit

JEGS Tube-style fuel sending units are ideal for applications where conventional float arm type units will not fit due to clearance issues. A floatless fuel sending unit is less susceptible to erratic fuel level readings that are due to slosh in a tank where baffles are not present. Each device requires no setup or calibration and has a standard aftermarket five-hole pattern (2 1/8 in.) mounting bracket that must be mounted perpendicular to the tank (vertically), with the ground at the top of the tank. We have 12 variations available; they come in different lengths as well as Ohms readings.

This cutaway image shows an installed JEGS floatless fuel sending unit used in a fuel cell with foam. This is the only way to get an accurate fuel level reading in a fuel cell with foam; with a 1/2 inch gap between the lower end of the unit and the bottom of the fuel cell.

Floatless Fuel Sending Unit Includes:

(1) Floatless Fuel Sending Unit
(1) SAE 5-Bolt Mounting Gasket
(5) #10-32 x 1 in. Thread Machine Screws
(2) 3/8 Hex Head #10-32 Thread Nuts
(2) #10 (3/16 in) Lock Washers

JEGS 15654 Features:

0-90 Ohms (Most 1965-1996 GM Applications)
9 in. Tube Length
1 3/8 (.375) in. Tall Mounting Flange
Standard SAE 5-Bolt (2 1/8 in.) Mounting Pattern
Compatible with gasoline and diesel fuels, will not support ethanol/E85
Extruded aluminum housing provides enhanced protection for the float and PC board
No float arm makes this sending unit ideal for tight spaces or tanks with baffles
Each sending unit only contains one moving part further increasing longevity
Reduces “slosh” in fuel tank making them ideal for high performance automotive and heavy-duty applications

For more information visit: www.jegs.com